Top 5 Mistakes in Golf Club Fitting

Have you ever wondered why some golfers come back from a club fitting shop and still underperform? Yes. It happens. And it doesn’t mean that the golfer does not have the proper knowledge of how to handle golf clubs. Instead, it could result from some golf club fitting mistakes that the player carries around the course.

Top 5 Mistakes in Golf Club Fitting

As you might have understood, one of the aims of getting fit is to ensure your golf club perfectly fits the swing you are striving to achieve. If you and your fitter could not combine effort to accomplish that, it might be tough to make changes to your swing. And, if you will ever make the change, it would be drastically slow.

Hence, getting fitted for golf clubs requires taking proper account and a high level of carefulness. You need to take care of every loop where you can mistakes if you want to get the correct result. 

Now, what are the most common mistakes you may see in your bag? Read on to unveil the top 5 of them.

1. Driver

The top custom club fitting mistake that is very common for the driver has a lesser loft for the driver to fit your swing. When your driver has the right amount of loft, it will help you drive the ball with your golf club higher and faster. There is no better way to get a maximum roll for your swing speed than having the correct loft for your driver.

Let me make it a bit clearer.

Your driver should have at least 10.5* loft to hit a six-iron 140 – 150 yards. And, if you are aiming to hit a six-iron 120 – 140 yards, your driver should 12* loft.

Another custom golf club fitting mistake common with drivers is having a shaft that is too heavy for you. If you are honest with yourself, you want your driver to give you more distance and forgiveness. I mean, every other golfer wouldn’t wish less. However, you can only get more space from your golf club if your driver has the appropriate loft and a lighter shaft.  

What’s a lightweight shaft? Well, generally, pro golfers consider about 40 – 50 grams of the shaft as lightweight, while they consider 50 – 55 grams of the shaft as mid-weight. Unfortunately, many golfers have up to 60 grams of the shaft in their drivers instead of lighter-weight shafts. Make sure you don’t make that mistake to get the best out of your custom club fitting.

2. Hybrids 

Many golfers make the mistake of not getting their hybrids fit for their lie angle. Judging by most of the complaints I have heard over time, it is widespread. Before we go any further, you need to note that you must adjust your lie angle fit for your size and swing. 

The dilemma always lies in that most golfers have too upright hybrids, making them heel dig their hybrids and hit or pull poor shots with them. That’s why some golfers find it easy to hit their hybrids perfectly out of the rough but find it difficult to hit them off fairways.

If you want to do wonders with your golf clubs, you must ensure that your hybrid perfectly fits your lie angle. If you miss that part, your hybrid might be working against you. 

Note that not all golf club manufacturers fit lie angles for golfers. Hence you might need to visit an expert fitter to make things right.

3. Fairway Woods

The most common mistake golfers make with fairway woods is less loft with their long fairway wood. Meanwhile, loft helps golfers to get the ball off the ground quickly a hit maximum distance. 

To avoid making the same mistake, you should not carry a three-wood in your bag unless you use it primarily off the tee.

If you want to hit the three wood appropriately with a maximum roll and fly, there’s a need for you to hit your six iron about 175 yards on the fly.

Although, most golfers will dare to hit a five-wood further than 3-wood off the ground. Yet, they will need the 5-wood loft to achieve maximum roll and fly. 

And it is not only a problem for beginners. Even some of the pro golfers you hail on the course will hit an 18* fairway wood off the ground and get the poor result. In the same way, average golfers can hit a 15* fairway wood off the ground and gain an unimpressive performance.

4. Irons

Golfers make several mistakes when it comes to irons (lie angle, length, flex, and more), but I will like to focus on one. 

Now, for the irons, the most common mistake golfers make with irons is that they don’t have the correct shaft in their irons. 

When you have the correct shafting in your irons and all golf clubs, it helps your ball to fly faster and higher on the course. As you should have learned, having the appropriate height will allow you to reach the maximum distance without stress. 

Besides, correct shafting will protect you. If you are around 4o years of age or more, you need a shaft to protect your body. The secret is the graphite shaft. When you have a graphite shaft in your iron, your body is safe. 

5. Wedges 

The most common mistake golfers make with wedges is that they are not fit for wedges. How could this happen? It’s simply because most golfers think they can visit a random golf club store and purchase anyone that attracts their sight off the rack. 

When it comes to the Gap, Lob, and sand wedges, they must be right for you for lie angle, length, flex, shaft, lofts, grip size, and the rest if you want to get the best out of your golf club. 

Top 5 Mistakes in Golf Club Fitting

Final Words

The common mistakes listed above have been why most golfers get poor results even after getting fitted for their golf clubs. And you don’t have to be a beginner before you fall into these mistakes. The best way out is to ensure that you watch all the golf clubs in your bag to avoid the low performance of the course. 

Posted by Thomas Flynn in Golf, Golf Clubs

Top 7 Reasons Why You Should Use SuperStroke Grips

The Australian Open or the PGA Tour should expect different shapes and sizes to open the popular golf event, the Australian Open or the PGA Tour. You can have small heads or oversized drivers, from old school blades to huge mallet putters. There are diverse types of golf equipment to run the competition through the highest level of influence and expected performance. Ideally, some of the newest types of golf clubs have fascinating grips, especially the putter.

Top 7 Reasons Why You Should Use SuperStroke Grips

In the 2011 PGA Championship, Jason Dufner nearly won the competition with an oversized SuperStroke putter grip. Since then, SuperStroke gradually began to make waves in the golf market with tremendous benefits. These grips can boost your game, but how? How can you make the best out of your SuperStroke grips? Below are 5 of the most important reasons you should switch to these fantastic grips.

SuperStroke Grips have been Tested on the PGA Tour

The number one proof of authenticity of the SuperStroke grip is that it has been tested ideally on the PGA tour. Some of the current best players in the PGA Tour used the oversized grips of the SuperStroke brand. For example, Sergio Garcia, Jordan Spieth, Dufner staff, and Victor Dubuisson are top players with the large SuperStroke grips. This model of tool can influence your game so positively with all its full benefits. 

Consistent Han Placement

When you have the SuperStroke Flatso flat-front grips at your disposal, you can quickly learn the right place to place your hands for the best stroke. The standard model grips with a flat front already indicate the best position for your hands and carry the right shape for the grip, unlike the standard circular ones. In addition, these flat-front grips promote consistent hand placement as well as the correct position for your thumbs. Therefore, the first step in producing high-quality strokes is aligning your hands correctly on the grip.

No Taper

The shape and position of putter grips of the SuperStroke brand are parallel from top to bottom. The oversized SuperStroke putter grips cleanly maintain a standard width through its length, contrary to traditional putter grips, just taper from top to the end. This feature of the grip allows equal pressure of the hands-on golf club without exerting excess pressure on any part of the hand while taking your shot. More so, you can thereby produce a more consistent stroke and better performance.

Extra Customization

Another fascinating feature of the SuperStroke grip is the relevance in producing the best shot with a firm grip on your club. Presently, the golf economy allows for the flexibility of personalizing different pieces of your golf game. The design of these grips offers a wide range of sizes and maximizes the golf performance on the course. Each of the holds in this model serves different functions. However, oversized grips can help your pendulum stroke and reduce the possibility of breaking your wrist during the stroke. Click here to learn more about Golf Clubs.

Worth the weight

The head part of the putter can really be lighter, primarily by increasing the size of the grip. In other words, when the weight of the grip is more lightweight, it implies that the clubhead will be heavier and that contributes to the swing weight while attempting a shot. On the other hand, a more severe grip automatically makes the chair much lighter. That is the main reason for creating oversized putter grips like the SuperStroke that enhances your chances for extra size without necessarily increasing the weight of the putter grip. 

Happy Thoughts

PGA Professional Jason Guss observed that a more prominent grip often gives the player more relaxed hands in the field of play. In addition, a larger grip also helps to get your mind in the correct position of the putter. Otherwise, a small grip implies that you have to exert a lot of o pressure on the putter, causing tension on your wrist. However, a more relaxed hand takes away every form of wrist stress. You don’t want to remember the thickness of the grip as long as it doesn’t stress your hands.

Learn this about a Putter Balance

There are two types of putter balance, which helps you better understand the right kind of putter. Ideally, the clubs may fall into the two predefined categories, which follow a general description for optimum use. While we can briefly describe the two common types of putter, we will also explain the expected balance. Some putters may fall into the categorization in between the two. Each has a significant consistency on the green. There are two balanced putters;

  • The Face Balanced Putters

As you balance the shaft on the fingers, you have a face-balanced putter that faces upwards. Also, it broods a kind of center of gravity that enhances the best axis of the shaft. However, if you straighten the stroke of your club, this face-balanced putter helps you to open less on your backswing, and you can easily follow through on your play. 

  • Toe Balanced Putters
Top 7 Reasons Why You Should Use SuperStroke Grips

As you place a stroke on the arc, you have a toe-balanced putter that can work the best performance of the golf club. In other words, a toe-balanced putter usually increases balance on the finger and points to the ground. However, the center of gravity of the toe-balanced putter is located below the shaft axis. However, when you place the putt in the arc, it can work best for the putter to open or close your swing throughout the process of taking your stroke.


You can ultimately outperform your expectation if you can lay hold on the SuperStroke Grips. This article also enhances your chances of getting the game’s best performance, according to the significant golf associations. At the same time, each golfer must understand the features of these oversized grips are compensated for by the cost. But why not try out some online retailing stores to drive the golfer in the winning ways. At least, for well over a decade, this accessory has proved that users can get better at their performance scores if they choose this proven product.

Posted by Thomas Flynn in Golf, Golf Clubs